How to set up Taruya cartridges.

”TARUYA STYLUS" Weight setting of turntable (stylus pressure adjustment) Special guide!

Thank you for using Taruya's cartridges.

When replacing a cartridge, setting is always necessary.

If this setting is not done correctly, the cartridge will skip.
Taruya's CEO, "Funky President ABE" will explain the correct cartridge setting.

*First, please set the record on the turn table.

Be sure to turn on the power.

*Please stop the turntable.

*Please set the height of the tone arm to about 4 mm.

*Please set the scale of anti skating to 0.

*Please be sure to remove the subweight.

When adjusting the 0 balance of the weight, please make sure that the tip of the TARUYA cartridge drops 2 to 3 mm below the record (when you see from the side)

At this time, if the tip of the cartridge does not seem to be 2 to 3 mm lower than the record, adjust the height of the tone arm. (It depends on the thickness of the slip mat you are using.)

Please make the weight scale to 3.5-4.0.

However, this method is not perfect.
This is because each user has a different play style and tastes in music.

Pursue the setting that best suits your style of play.

Enjoy the Vinyl!

Taruya Japan.